RK CUTTER PRESS-FIT RIVETING CHAIN TOOL UCT2100(50)
TECH SPECS
Tool Parts and Pieces
- Complete Tool Kit – UCT2100(50)
- Tool Body – TB2100
- Large Pressure Bolt – PBL220
- Small Pressure bolt – PBS210
- Cuttin Pin – CP4050
- Cutting Pin Holder – CP4050H
- Plate Holder – PH500JP
- Tail Piece for Cutting – TPC210
- Tail Piece for Riveting – TPP220
- Flare Pin for Riveting – FP500JP or FP428JP*
*FP428JP and PH428 are available separately and not included in kit.
UCT2100(50) CHAIN TOOL
Quickly and easily breaks 40 & 50 type chain. Easily press-fits tight tolerance 40, 50 O-ring chain sideplates to the correct depth for clip or rivet link installation *to Press-Fit 40 series chains you need part #PH428 sold separately. Flares RK’s special rivet pin hole rivet links. New design allows components to lock into tool body and larger pressure bolt for easier use without dropping tool components. Note – Tool is not able to rivet 420/428 type chains without (FP428JP & PH428) *sold separately. NOTE: UCT2100(50) cannot press-fit or rivet 530PRODR.
Redesigned sure-grip handle and laser engraved part number for easier part identification. The new press fit holder plate features a reversible post to switch between clip plate and rivet plate. The redesigned Rivet Flare Pin now features a flare guard to prevent over riveting. Limited lifetime warranty on material and craftsmanship of the Tool Body.
Replaceable spare components and 40 series parts available.
Suggested Retail: $112.19
| PART NO. | DESCRIPTION | NOTES | RTL |
|---|---|---|---|
| UCT2100(50) | RK Chain Cutter & Press Fit Tool | *New version of UCT2100 | $112.19 |
| REPLACEMENT PARTS | |||
| CP4050 | SKH9 Special Tool steel cutting pin, replacement | $16.94 | |
| CP4050H | Cutting Pin Holder, replacement | $11.74 | |
| FP500JP | Rivet Flare Pin, replacement | *New version of FP2100 | $11.74 |
| PBS210 | Small Pressure Bolt, replacement | $21.55 | |
| PBL220 | Large Pressure Bolt, replacement | $28.13 | |
| PH500JP | #500 Plate Holder 520,525,530 series chain | *PHC210 & PHR210 function combine in one | $21.55 |
| TPC210 | Tail Piece for Chain Cutting, replacement | $11.74 | |
| TPP220 | Tail Piece for Press Fitting, replacement | $11.74 | |
| PH428 | #400 Plate Holder | Option for 428 size chain *Sold Separately | $21.55 |
| FP428JP | #400 Rivet Flare Pin | Option for 428 size chain *Sold Separately | $11.74 |
Riveting Examples
GOOD Rivet Job
Example of a good Rivet Job. Nice even flaring. Flared just enough to secure the sideplate but not too much to bind the link.
GOOD Rivet Job
Example of a good Rivet Job. Nice even flaring. Flared just enough to secure the side plate but not too much to bind the link. Notice the very slight flare.
BAD Rivet Job
Example of a bad Rivet Job. Rivet was over flared and the pin cracked. Too much pressure was used installing the connecting link.
BAD Rivet Job
Example of a bad Rivet Job. Notice that the pin is overly flared and resulted in the pin cracking. You want a very slight flare, just enough to secure the sideplate.
After riveting, measure the flared pin in several directions. Do not exceed MAX rivet diameter.
